TABLE DEVICE 1-FOLD, BUTTON / BUZZER

A pre-fabricated device with buzzer and button functions. The device is based on FIP1001, which is mounted in the mounting box FLK1010. Equipped with a 6-pole connection wire. The lenght of the wire is 2m and it has a RJ11 male connector. The LED of the push button and the buzzer operates in parallel. The buzzer can be cancelled with the push button. In alarm position the LED flickers. When cancelled it lits constantly till the alarm goes off. Good marking possibilities on the push button and the name plate. Operating voltage 9,5 - 28 Vac / 9,5 - 35 Vdc. Current consumption: 45 mA ac / 35 mA dc. Load capacity of the switch: 42 Vac / 60 Vdc, 250 mA ac/dc, 6 VA / 4 W.