COMBITHERMOSTAT IMPRESSIVO 5/35 15A IP31 U WHITE

When the thermostat is on, the LED displays either a green or red light. The LED displays a red light during the heating period. Set the room temperature to the desired value with the round adjustment knob; the adjustment range is +5...+35 °C Set the maximum floor temperature by turning the adjustment screw in the top left corner; the adjustment range is +20...+50 °C. When the thermostat is used to adjust a floor heating element heating a floor made of wood or corresponding material, never set the maximum floor temperature to over +35 °C (factory setting), or according to the floor material manufacturer’s instructions. The device measures the temperature inside the floor, which differs from the floor’s surface temperature. Freezing protection: Set the adjustment knob to position 5, and the thermostat will keep room temperature at +5 °C. Temperature limiting: There are limiting pins under the adjustment knobs that use to limit the movement of the adjustment knob. Move the pins to the desired position to set the maximum and minimum temperatures. • 230 V~ • 50 Hz • 15 A • 3450 W • IP 31 • Doubleinsulated • Sensor: 3 m NTC 15 k? / 25 °C • Operating temperature: -10…+30 °C • Switch: 2-pole • Screw terminals: max. 2x2.5 mm2 • Temperature drop: fixed 5 °C • Adjustment range: +5…+ 45 °C • Hysteresis +/- 0.4 °C