DIMMER IMPRESSIVO LED 6523UJGL-885P M.BLACK

Low-profile matte black Impressivo LED dimmer, includes housing and center plate. The recessed depth of the LED dimmer is 20 mm. The LED rotary knob dimmer is a 2-wire solution (no neutral wire required). The dimmer can be configured for either RL or RC operation. The power range is 2-100 VA for LED loads. 10-400 W for other loads (see installation instructions). With traditional transformers, approximately 20% power loss must be considered. Permitted loads: - Dimmable Retrofit (E27, E14, GU10) LED, 230 V - Halogen lamps, 230 V - Dimmable Retrofit (GU5.3) LED, 12 V (transformer L, LC) - Halogen lamps 12 V (transformer L, LC) - Dimmable energy-saving lamps - Incandescent lamps 230 V - Mixed loads are permitted Electronic short-circuit and overload protection. The dimmer's base brightness can be adjusted using the potentiometer located in the upper right corner of the device (min adjustment). Operation in switching circuits is possible according to the installation instructions. This product description is an automated translation of the original Finnish description.