METERING CENTRE 1M5T09URJ-LO8

1-T measurement center for surface or recessed mounting with a fixed base. VVSK-protected sockets: 2 x 116 and 1 x 316, each with individual circuit breakers. The center is equipped with a Class T2 surge protector. Remote reading model, color shade light gray, RAL 7035.

The outdoor measurement center features an attractive design with a curved door and an effect surface that prevents, among other things, fingerprint residue, known as the orange peel surface. A separate inner roof prevents condensate water from dripping onto the equipment. The arrangement of connectors minimizes the need for cable looping. The center includes a fixed cable strain relief for the supply cable. Main fuse holders are supplied with the center. Optional accessory: ground studs for the base, ZX8, 3417038.

Features

• Standard 50 mm² Cu/Al common connectors for the supply cable
• Dimensions: 400 x 1600 x 170 mm
• For surface or recessed mounting
• Equipped with circuit breakers
• Residual current protection
• Surge protection
• Removable supply flange

NäpsäSMART measurement centers are suitable for remote reading. The Cu supply cable of the group center is connected to the upper 25 mm² terminals of the residual current device (left side). Built-in residual current protected sockets (3 x 16A, 2 pieces; 1 x 16A) are each behind their own circuit breakers, enabling simultaneous high loads on the sockets. The circuit breakers for the socket outlets can also be used later for other purposes, such as for garage sockets. Installation instructions are included.

The outdoor measurement center has a potential equalization bar mounted on the base. In wall mounting, a 10% clearance is provided (for timber wall settlement). A multi-flange is provided for outgoing cables, and a recess at the bottom of the door accommodates cables connected to the center's sockets.

This product description is an automated translation of the original Finnish description.