BOX SUPPORT AS101 FOR CONC. CASTING

AS101 box supports are used to mount instrument or partition boxes on the upper surface of the casting element during casting at concrete element plants. The box support is assembled from two AS101 plastic components: one is attached to the casting table using a vacuum casting anchor magnet (e.g., D60/65 H10, M16), and the other is connected to the box (e.g., AU5.2 or AU5.32). The plastic components are joined together with two steel rods, either Ø10 mm or Ø8 mm. The length of the steel rods depends on the element thickness and the height of the box used (separate cutting instructions for rod length).

Manufactured from 100% recycled plastic (household plastic packaging waste). The material is halogen-free (IEC/61249-2-21).

NOTE! 2 pieces of AS101 box supports are required for installation!

This product description is an automated translation of the original Finnish description.