ARMAFLEX GLUE 625 HT 625 0,5 l

Armaflex HT 625 is a one-component adhesive specifically developed for bonding Armaflex insulations used at high temperatures (excluding Armaflex Ultima). The product is particularly suitable for securely attaching HT/ArmaFlex® and ArmaFlex® DuoSolar materials. Features

• Polychloroprene-based contact adhesive
• Suitable for industrial use
• Easily spreadable
• Heat resistant up to +150 °C
• Ideal working temperature: 15-20 °C
• Excellent adhesion to metal surfaces
• Compatibility with painted surfaces should be tested
• Not suitable for surfaces treated with asphalt, bitumen, or lead-based paints (linseed oil-based)
• Minimum drying time (ventilation time): less than 2 minutes
• Tack time: 15-20 minutes
• Curing time: 36 hours
• Shelf life unopened: 18 months
• Store in a dry, cool, and well-ventilated area, protected from freezing
• Color: beige

Application

• Shake and mix thoroughly before use.
• Clean surfaces to be bonded with Armaflex Cleaner.
• Apply adhesive thinly to bonding surfaces using a spatula or brush. Press surfaces firmly together until they adhere. Final strength is achieved after 36 hours.
• Avoid application in direct sunlight. The product is not recommended for use at temperatures below 0 °C or at relative humidity above 80 %, as condensation may impair or prevent adhesion.

Approximate Coverage

Armaflex sheets: 3-4 m²/l

Armaflex pipe insulation:

• 13 mm thick insulation tubes: split 115 m/l and unsplit 840 m/l
• 19 mm thick insulation tubes: split 70 m/l and unsplit 280 m/l
• 25 mm thick insulation tubes: split 58 m/l and unsplit 230 m/l

This product description is an automated translation of the original Finnish description.