PVC COAT BEND 90 76-40 Ø 156mm

The 90-degree PVC coating curve is designed as a protective shell for the insulation of LV and IV pipes. Coating is fast and easy. The coating curve is sized according to the inner diameter of the pipe insulation and the insulation thickness. The insulation thickness does not decrease during installation. Features

• insulation thickness of 40 mm, does not decrease during installation
• diameter of 76 mm
• robust, non-cracking, and corrosion-resistant material
• manufactured in accordance with standard 4140

Storage and Installation

Store PVC products at temperatures below 30 °C, protected from moisture and direct sunlight.

If the product has been transported or stored in cold conditions, it is recommended to keep it at room temperature for a few hours before beginning installation.

Handle PVC products preferably at a temperature of 20–23 °C (relative humidity 50–60 %) to prevent static electricity buildup.

This product description is an automated translation of the original Finnish description.