ICEGUARD CABLE ICEGUARD-18 15M 270W 230V

Heating cables for snow and ice melt in gutters and downspouts
DEVIiceguard™ is a meter-marked heating cable designed for snow and ice melt in gutters, downspouts, and pipes. Self-regulating DEVIiceguard™ cables protect against freeze damage. DEVIiceguard™ cables do not overheat even when they touch or cross each other.

The heating cable is installed unidirectionally into the gutter or pipe.
- rainwater systems
- roof edges
- stairway snow melt
- indoor or outdoor use

Connection and extension kits: DEVI EasyConnect™
For water drainage in downspouts, use a drain fitting (SSTL 04 312 87).

Ready-made cables are equipped with a 5-meter connection cable.

DEVIiceguard™-18, 18 W/m / 0°C,
DEVIiceguard™-36, 36 W/m in ice water

Technical specifications:
Voltage: 230 V
Power/m: 18 W/m at 0°C, 36 W/m in ice water
Dimensions: ~6 x 12 mm
Cable type: Shielded, 2-core cable
Sheath: Polyolefin
Minimum installation temperature: -60 °C
Maximum maintenance temperature: 65 °C
Maximum length in downspout: 30 m
Minimum bending radius: 32 mm
Cable markings: Product and meter markings

Approvals: SEMKO, CE Self-regulating heating cables must be equipped with a thermostat to prevent overheating. The cable must be protected by a 30 mA residual current device. This product description is an automated translation of the original Finnish description.