HEATING CABLE DEVIFLEX DTIP-18 105M 1900W

DEVIflex™ 18T heating cable is suitable for floor heating in concrete slabs (thickness over 5 cm) in new constructions such as residences, offices, public spaces, factories, schools, etc., with tile, plastic, cork, laminate, or wooden flooring. The heating cable is supplied on a pre-measured single-use reel, facilitating installation. The cable is marked with meter indicators. The heated area is 16 - 24 m². The power output of the DEVIflex™ 18T heating cable is 18 W/m. When installed, for example, in a reinforcement mesh with a 15 cm spacing, a heating output of approximately 120 W/m² is achieved. The DEVIflex™ 18T heating cable can also be used in outdoor areas for melting snow on stairs, footpaths, and yard areas. With a 7 cm installation spacing, a power output of 250 W/m² is achieved. Technical specifications:

• operating voltage: 230 V
• power per meter: 18 W/m
• diameter: 6.9 mm
• cable construction: round, shielded, two-conductor, one connection cable
• connection cable: 2.3 m, DTCL, 3 x 1.5 mm² or 3 x 2.5 mm²
• outer sheath: PVC
• maximum ambient temperature: 65 °C
• minimum installation temperature: -5 °C
• minimum bending radius: 6 x cable diameter
• conductor insulation: PEX
• standards: SEMKO, CE, IEC60800-2009

This product description is an automated translation of the original Finnish description.