HEATING CABLE DEVIKIT DTIR-10 20M 200W

DEVIcomfort™ renovation cable is suitable for heating concrete, wood, and panel structures (gypsum board and particleboard) floors in new constructions and renovations of apartments, offices, public spaces, factories, schools, etc., with tile, plastic, cork, laminate, or wooden finishes.

Suitable applications:

• apartments
• offices
• public spaces
• factories
• schools

The heating cable is supplied pre-measured on a single-use reel, facilitating installation. The cable is marked with meter indicators. The power output of the DEVIcomfort™ renovation cable is 10 W/m with a diameter of only 4.0 mm. The installation spacing can vary between 12–6 cm, resulting in a power density of 80–150 W/m². Typically, a power of 100 W/m² is used.

For installation on reinforcement mesh, it is recommended to use DEVIflex heating cable.

Features

• operating voltage: 230 V
• power/m: 10 W/m
• cable diameter: 4 mm
• cable construction: 2-core, one connection cable
• connection cable: 2.5 m, 2 x 1.5 + 1.5 mm²
• conductor insulation: FEP
• outer sheath: PVC 90 °C
• maximum temperature: 90 °C
• bending radius: minimum 30 mm
• standards: SEMKO, CE

This product description is an automated translation of the original Finnish description.