Roll over image to zoom in
HEATINGMAT DEVIMAT DTIF-150 0,5X2M 1M2 150W
Product code
8174002
Thin heating mat for renovation projects, heating area 1 m²
DEVImat™ 150 is a two-core, pre-installed heating mat equipped with a single connection cable, with the cable pre-attached at the correct installation spacing. The underside of the thin mat features an adhesive surface on the mesh and tapes. The mat width is 0.5 m and the length is determined by the area to be heated.
DEVImat™ 150 heating mats can be used in concrete floors in both wet and dry environments when the surface material is tile.
Technical specifications:
Mat: Self-adhesive surface across the entire width of the mat, width 0.48 m (installation width 0.5 m)
Operating voltage: 230 V
Power/m²: 150 W
Cable diameter: 3 mm
Cable construction: Two-core, one connection cable
Connection cable: 4.0 m, 2 x 1.0 + protective earth
Conductor insulation: FEP
Sheath: PVDF 90 °C
Maximum ambient temperature: 90 °C
Standards: SEMKO, CE This product description is an automated translation of the original Finnish description.
DEVImat™ 150 is a two-core, pre-installed heating mat equipped with a single connection cable, with the cable pre-attached at the correct installation spacing. The underside of the thin mat features an adhesive surface on the mesh and tapes. The mat width is 0.5 m and the length is determined by the area to be heated.
DEVImat™ 150 heating mats can be used in concrete floors in both wet and dry environments when the surface material is tile.
Technical specifications:
Mat: Self-adhesive surface across the entire width of the mat, width 0.48 m (installation width 0.5 m)
Operating voltage: 230 V
Power/m²: 150 W
Cable diameter: 3 mm
Cable construction: Two-core, one connection cable
Connection cable: 4.0 m, 2 x 1.0 + protective earth
Conductor insulation: FEP
Sheath: PVDF 90 °C
Maximum ambient temperature: 90 °C
Standards: SEMKO, CE This product description is an automated translation of the original Finnish description.
Product details
Technical specifications
Product class (ETIM)Electric surface heating (EC000405)
ModelHeating cable
With support matyes
Fixation thermal conductorGlued
Self-adhesiveyes
Connection voltage230 - 230 V
Connected load150 - 150 W
Power150 W/m²
Heating conductor load11 W/m
Resistance377 Ohm
Number of cold conductors1
Length of cold conductors4000 mm
Suitable as outdoor surface heatingno
Suitable as roof surface heatingno
Surface1 m²
Length2000 mm
Product codes
SAPABT830
STK8174002
PLC8174002
GTIN/EAN5703466094938
Manufacturer part number140F0445
Vendor material number8174002
Basic information
Package measurements (L x W x H)610 x 150 x 140 mm
Package volume12.81 l
Package weight0.972 kg
Base uniteach
Package units1 / 40
Package contents–
UNSPSC40101851
BrandDEVI
VendorDANFOSS OY AB