Roll over image to zoom in
HEATINGMAT DEVIMAT DTIF-150 0,5X6M 3M2 450W
Product code
8174006
Thin heating mat for renovation projects, heating area 3 m²
DEVImat™ 150 is a two-core, pre-installed heating mat equipped with a single connection cable, with the cable pre-attached at the correct installation spacing. The underside of the thin mat features an adhesive surface on the mesh and tapes. The mat width is 0.5 m and the length is determined by the area to be heated.
DEVImat™ 150 heating mats can be used in concrete floors in both wet and dry environments when the surface material is tile.
Technical specifications:
Mat: Self-adhesive surface across the full width of the mat, width 0.48 m (installation width 0.5 m)
Operating voltage: 230 V
Power/m²: 150 W
Cable diameter: 3 mm
Cable construction: Two-core, one connection cable
Connection cable: 4.0 m, 2 x 1.0 + protective earth
Conductor insulation: FEP
Sheath: PVDF 90 °C
Maximum ambient temperature: 90 °C
Standards: SEMKO, CE This product description is an automated translation of the original Finnish description.
DEVImat™ 150 is a two-core, pre-installed heating mat equipped with a single connection cable, with the cable pre-attached at the correct installation spacing. The underside of the thin mat features an adhesive surface on the mesh and tapes. The mat width is 0.5 m and the length is determined by the area to be heated.
DEVImat™ 150 heating mats can be used in concrete floors in both wet and dry environments when the surface material is tile.
Technical specifications:
Mat: Self-adhesive surface across the full width of the mat, width 0.48 m (installation width 0.5 m)
Operating voltage: 230 V
Power/m²: 150 W
Cable diameter: 3 mm
Cable construction: Two-core, one connection cable
Connection cable: 4.0 m, 2 x 1.0 + protective earth
Conductor insulation: FEP
Sheath: PVDF 90 °C
Maximum ambient temperature: 90 °C
Standards: SEMKO, CE This product description is an automated translation of the original Finnish description.
Product details
Technical specifications
Product class (ETIM)Electric surface heating (EC000405)
ModelHeating cable
With support matyes
Fixation thermal conductorGlued
Self-adhesiveyes
Connection voltage230 - 230 V
Connected load450 - 450 W
Power150 W/m²
Heating conductor load11 W/m
Resistance129 Ohm
Number of cold conductors1
Length of cold conductors4000 mm
Suitable as outdoor surface heatingno
Suitable as roof surface heatingno
Surface3 m²
Length6000 mm
Product codes
SAPABT834
STK8174006
PLC8174006
GTIN/EAN5703466094976
Manufacturer part number140F0449
Vendor material number8174006
Basic information
Package measurements (L x W x H)610 x 150 x 150 mm
Package volume13.725 l
Package weight1.9 kg
Base uniteach
Package units1
Package contents–
UNSPSC40101851
BrandDEVI
VendorDANFOSS OY AB