Roll over image to zoom in
COMBINED RCD/MCB PKNM-10/1N/C/003-A
RCD/MCB combination switch, PKNM, 1-pole+N, rated current In: 10 A, rated residual current: 0.03 A, MCB tripping characteristic: C, 1p+N, RCD tripping characteristic: A. Rated switching capacity according to IEC/EN 61009 standard: 10 kA, suitable for residential and commercial applications. Frost resistance down to -25 °C.
This residual current device with integrated overcurrent protection in 1+N pole configuration is a high-quality combination of a residual current switch and a miniature circuit breaker.
This RCD/MCB combination PKNM switch is not only available as a standard type A, sensitive to alternating current and pulse current, but also as type F, sensitive to mixed frequency, and type G or G/A with a minimum time delay of 10 ms. While AC and A types withstand only pulse currents up to 250 A, the other three types F, G, and G/A offer higher pulse current resistance exceeding 3 kA.
- Independent of network voltage triggering
- Switch position indicator: red – green
- Wide range of rated tripping currents up to 40 A
- Compatible with standard DIN rail
- Dual terminal (lift/clip-on) on top and bottom
- Flexible busbar mounting options (top or bottom)
- Free terminal state regardless of installed busbar
- Controlled connection to safe terminal
- 3-position DIN rail mounting, enabling removal from existing busbar system
- Comprehensive range of accessories for post-installation
- Switching device (MCB component) colored to indicate rated current
- Also available in 110 VAC version