REMOTE CONTROLLER EI450

EI450 is a single-button remote control with the following functions: test, hush, locate, and memory.

Test

• Pressing the test button (TEST) simulates the operation of the smoke alarm’s own test button. When the remote control’s test button is pressed, the system tests all detectors connected to the remote control.

Hush

• The hush button (HUSH) silences the activated detectors for approximately 10 minutes, after which the system automatically returns to normal mode. The hush function does not prevent the detectors from operating but changes their sensitivity settings. If a large amount of smoke is detected, the smoke alarms will still trigger even during the hush period.

Locate

• Pressing the locate button (LOCATE) during an alarm silences all other smoke alarms except the first one to trigger, significantly speeding up the identification of the fire’s origin. If an alarm has occurred while no one was present, pressing the locate button will indicate which detector triggered the alarm, even if the alarm has already stopped sounding. To clear the alarm memory, hold down both the locate and test buttons simultaneously for five seconds.

Memory

• Pressing the memory button (MEMORY) indicates that an alarm has occurred when no one was present.

This product description is an automated translation of the original Finnish description.