ELEMENT SCREW EJOT JT3-D-12H 5,5/6,3X115-E19 A2 100PCS

Bimetallic 5.5 mm screw (panel screw) for sandwich panel fastenings. Equipped with a pre-drilled EPDM sealing washer with a diameter of 19 mm. The sealing washer material is stainless steel A2. The shank below the head is unthreaded. The screw also features a pilot thread with a diameter of 6.3 mm. The screw has a hex head with a wrench size of AV8. The product has European Technical Approval ETA-13/0177 for sandwich panel fastenings. The product is also CE marked. The screw material is stainless steel A2. The tip is a hardened steel drill point with a drilling capacity of 12 mm. Maximum installation rotational speed is 1300 rpm. Pack size is 100 pieces. The screw has a partial thread with a thread length of 40 mm. The washer head diameter is 10.5 mm, and the hex head height is 5.3 mm. Fastening thickness range is 61–88 mm. The screw is suitable for fastening to steel substructures with a steel thickness of 3–12 mm. Drill point screw, bimetallic stainless steel, 12 mm drill point, 8 mm hex head. Fastening of sandwich panels to steel substructures. 19 mm pre-drilled stainless EPDM sealing washer. Unthreaded section below the head. Pilot thread 6.3 mm. This product description is an automated translation of the original Finnish description.