POLYFUNCTION RELAY MFZ12DX-UC

Multifunctional time relay with analog settings, configurable for 18 different functions. Time settings adjustable between 0.1 seconds and 40 hours.

• 1 potential-free changeover contact (CO) 10A/250V AC.
• 230V LED load up to 200W.
• Incandescent lamp load up to 2000W.
• Standby power consumption only 0.02-0.6 watts.
• Modular unit for rail mounting according to DIN-EN 60715 TH35 standard.
• 1 module = width 18mm, depth 58mm.
• With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected to the neutral point at 230V AC 50Hz, significantly reducing their wear. For this, simply connect the neutral conductor to terminal (N) and L to terminal 1(L). Standby power consumption then is only 0.1 W.
• General control voltage 12-230V AC/DC, control voltage equals operating voltage.
• Time settings adjustable between 0.1 seconds and 40 hours.
• Thanks to bistable relay operation, possible coil-induced losses and heat generation are avoided even when the relay is in use.
• After installation, wait until the short automatic synchronization is complete before connecting loads to the network.
• Depending on the power supply connection to terminals B1-A2 and B2-A2, two different operating levels can be selected.
• The LED indicator light below the large rotary switch shows the contact position during the time period. It flashes when relay contacts 15-18 are open (15-16 closed) and stays continuously lit when relay contacts 15-18 are closed (15-16 open).
• This product description is an automated translation of the original Finnish description.