POLYFUNCTION RELAY MFZ61DX-UC

Analogously settable multifunction timer module, totaling 6 different timing functions. General control voltage 12-230V AC/DC. Control voltage is the same as operating voltage. Time settings adjustable from 0.5 seconds to 1 hour. Functions

• RV = off delay
• AV = on delay
• TI = pause/on-time, on-time at startup
• IA = impulse-controlled on delay (e.g. door opener)
• EW = pulse during on switching (flash)
• AW = pulse during off switching (flash)

• 1 potential-free normally open (NO) contact 10A/250V AC.
• 230V LED load up to 200W.
• Incandescent lamp load up to 2000W.
• Standby power consumption only 0.02–0.4 watts.
• For mounting in a control panel, length 45mm, width 45mm, depth 18mm.
• With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected at the neutral point of 230V AC 50Hz, thereby significantly reducing their wear. For this purpose, simply connect the neutral conductor to terminal (N) and the L terminal to 1(L). Standby power consumption is then only 0.1W.
• Modern hybrid technology combining the advantages of wear-free electronic control and high-performance special relays.
• Due to the use of bistable relay operation, energy loss and heat generation from the coil are avoided even when the relay is in operation.
• After installation, wait until the short automatic synchronization is complete before connecting devices to the network.
• General control voltage 12-230V AC/DC. Control voltage is the same as operating voltage.

This product description is an automated translation of the original Finnish description.