ENERGY METER ELTAKO MOBILE 1-PHASE, CARAVAN+VV

Portable single-phase energy meter with CEE male and female plugs and PRCD residual current device 30 mA. All meter models are MID-certified, meaning the meter reading can be used as a basis for billing. - Suitable for indoor and outdoor use. - With metal hanging strap (removable). - Maximum current 16A. - Standby power consumption only 0.4W. - Housing dimensions 155 x 60 x 82 mm. - Connection cable 1.5 m (including plugs). - Accuracy class B (1%). - MID-approved. - This portable single-phase energy meter measures the active energy between input and output. - The device’s own consumption, which is at most only 0.4 watts, is not included in measurements and is not displayed on the screen. - The display alternates every 10 seconds between total consumption (kWh) and consumption at the reading moment (kWh). - Starting current is 20 mA. - The display reading can only be viewed when the power, i.e., the male plug, is connected. However, consumption is always stored in the meter’s non-volatile memory upon disconnection, and the previous reading appears on the display immediately after power is restored. - The digital display has 7 digits. Two decimal places are shown up to 99999.99 kWh; above 100000.0 kWh, only one decimal place is displayed. - Power consumption is indicated by an LED light that flashes at a rate of 2000 times/kWh. - The PRCD residual current device detects faults that occur, for example, when touching a faulty electrical appliance. It disconnects the power so quickly that life-threatening accidents can be prevented. It also includes undervoltage protection, which interrupts power flow if the voltage drops too low, for example due to a disturbance in the mains voltage. Function indication and test button. This product description is an automated translation of the original Finnish description.