ENERGY METER ELTAKO MOBILE 1-PHASE, SCHUKO+VV

Portable single-phase energy meter with Schuko (Type F) male and female plugs and a residual current device (RCD) of 30 mA. All meter models are MID-certified, meaning the meter reading can be used as a basis for billing. Suitable for indoor and outdoor use. With a metal hanging loop (removable). Maximum current 16A. Standby power consumption only 0.4W. Enclosure dimensions 155 x 60 x 82mm. Connection cable 1.5m (includes plugs). Accuracy class B (1%). MID-approved. This portable single-phase energy meter measures the active energy between input and output. The device’s own consumption, which is at most only 0.4 watts, is not included in the measurements and is not displayed. The display alternates every 10 seconds between total consumption (kWh) and the consumption at the reading moment (kWh). Starting current is 20mA. The display reading can only be viewed when the power, i.e., the male plug, is connected. However, consumption is always stored in the meter’s non-volatile memory upon disconnection, and the previous reading appears on the display immediately after power is restored. The digital display has 7 digits. Two decimal places are shown up to 99999.99 kWh; above 100000.0 kWh, only one decimal place is displayed. Power consumption is indicated by an LED light that flashes at a rate of 2000 times/kWh. The RCD residual current device detects faults occurring, for example, when touching a defective electrical appliance. It interrupts the current so quickly that life-threatening accidents can be prevented. It also features undervoltage protection, which interrupts power flow if the voltage drops too low, for example due to a disturbance in the mains voltage. Function indication and test button. This product description is an automated translation of the original Finnish description.