ENERGY METER ELTAKO S15 2-WAY 3X80A MID 4-DIN

Bidirectional three-phase energy meter, suitable for solar panel installations. MID approved. The LCD display shows total energy consumption and production (kWh), resettable memory-stored total consumption and production (kWh), instantaneous power P (kW), instantaneous voltage U (V), and instantaneous current I (A) per phase. In normal display mode, values obtained from energy measurement are balanced, and the display shows the sum of readings in both directions. • Modular unit for DIN-EN 60715 TH35 compliant rail mounting. • 4 modules = width 70mm, depth 58mm. • Accuracy class B (1%). • Equipped with S0 interface. • Direct-acting three-phase current meter, measuring active energy flow between inputs and outputs based on electrical currents. • The device's own consumption, at most 0.5 watts, or active power of 0.5 watts per conductor, is not included in measurements and does not appear on the display. • Up to 1, 2, or 3 phase conductors with a maximum current of 80A can be connected to the meter. • Starting current is 40mA. • The N terminal must always be connected. • Energy consumption and production values are stored in non-volatile memory and reappear immediately after a power outage. • The 7-segment LCD can be read without power supply twice within two weeks. • Power consumption is indicated by a bar on the display, flashing at a rate of 100 times/kWh. • On the right side of the display are the MODE and SELECT buttons. Press them to navigate the menu according to the user manual. • Fault indication (false). If any phase conductor is missing, 'false' appears on the display along with the affected phase conductor. This product description is an automated translation of the original Finnish description.