INTERMEDIATE RELAY ER12DX-UC

Electronic relay for DIN rail. - 1 potential-free normally open (NO) contact 16A/250V AC. - 230V LED load up to 600W. - Incandescent lamp load up to 2000W. - No standby power consumption. - Modular unit for rail mounting according to DIN-EN 60715 TH35 standard. - 1 module = width 18mm, depth 58mm. - Modern hybrid technology combining the advantages of wear-free electronic control and high-performance special relays. - With the patented Eltako Duplex technology (DX), normally potential-free contacts can still be switched at the zero point of 230V AC 50Hz, significantly reducing their wear. For this purpose, simply connect the neutral conductor to the (N) terminal and the L terminal to 1(L). Standby power consumption is then only 0.1W. - If the contacts are used to control a device that does not switch at the zero point, the (N) terminal must not be connected, as an additional switching delay could lead to the opposite result. - General control voltage 12-230V AC/DC. - Extremely quiet switching sound. - LED indicating contact position. - Thanks to bistable relay operation, possible coil-induced losses and heat generation are avoided even when the relay is in use. - The relay contact can be open or closed when put into service. It is synchronized during the first operation. This product description is an automated translation of the original Finnish description.