POLYFUNCTION RELAY MFZ12-230V

Multi-function time relay with analog settings, configurable for 10 different functions. Time settings adjustable between 0.1 seconds and 40 hours.

• RV = off delay
• AV = on delay
• TI = pause/on time, on time at startup
• TP = pause/on time, pause at startup
• IA = impulse-controlled on delay (e.g., door opener)
• EW = pulse during on (flash)
• AW = pulse during off (flash)
• ARV = on and off delay
• ON = permanently on
• OFF = permanently off

The LED indicator below the top rotary switch shows the contact position during timing. It flashes when the contact is open and remains on as long as the contact is closed.

The base time T is set using the middle, lockable T rotary switch. Available base values are 0.1 second, 0.5 second, 2 seconds, 5 seconds, 1 minute, 2 minutes, 5 minutes, 1 hour, 2 hours, and 4 hours. Total time is obtained by multiplying the base time by a factor.

The factor xT is set using the lockable xT rotary switch between 1 and 10. This allows setting the time interval between 0.1 second (base time 0.1 second and factor 1) and 40 hours (base time 4 hours and factor 10).

• 1 normally closed (NO) potential-free contact 10A/250V AC.
• 230V LED load up to 200W.
• Incandescent lamp load up to 1000W.
• Standby power consumption only 0.4 watt.
• Modular unit for rail mounting according to standard DIN-EN 60715 TH35.
• 1 module = width 18mm, depth 58mm.
• Control voltage 230V. Control voltage is the same as operating voltage.
• Time settings adjustable between 0.1 seconds and 40 hours.

This product description is an automated translation of the original Finnish description.