PUSHRELAY ES12DX-UC

Electronic relay, capable of withstanding long-duration and continuous control pulses. - 1 potential-free normally open (NO) contact, 16A/250V AC. - 230V LED load up to 600W. - Incandescent lamp load up to 2000W. - No power consumption in standby mode. - Modular unit for rail mounting according to DIN-EN 60715 TH35 standard. - 1 module = width 18mm, depth 58mm. - With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected at the neutral point of 230V AC 50Hz, significantly reducing their wear. For this purpose, simply connect the neutral conductor to terminal (N) and the L terminal to terminal 1(L). Power consumption in standby mode is then only 0.1W. - If the contacts are used to control a switch that itself does not switch at the neutral point, the (N) terminal must not be connected, as an additional switching delay would produce the opposite result. - Alternatively, general control voltage 12–230V AC/DC or 230V with a maximum of 5mA indicator current, as per connection instructions. - When using both control inputs, the potential must be the same. - Extremely quiet switching sound. - Continuous control voltage is not required, thus avoiding unnecessary power consumption. - Modern hybrid technology combining the advantages of wear-free electronic control with the high performance of robust electromagnetic relays. - Thanks to the bistable relay operation, possible coil-induced losses and heat generation are avoided even when the relay is in use. - The relay contact can be either open or closed when put into operation; it is synchronized during the first use. This product description is an automated translation of the original Finnish description.