PUSHRELAY ESR12DDX-UC

Digital multifunction impulse relay with working current relay function. Choose from 18 different relay and contact functions. - 1+1 potential-free normally open (NO) contacts 16A/250V AC. - 230V LED load up to 600W. - Incandescent lamp load up to 2000W. - Standby power consumption only 0.03-0.4 watts. - Modular unit for rail mounting according to DIN-EN 60715 TH35 standard. - 1 module = width 18mm, depth 58mm. - With patented Eltako Duplex technology (DX), normally potential-free contacts can still be connected to the neutral point at 230V AC 50Hz, significantly reducing their wear. For this, simply connect the neutral conductor to terminal (N) and L to terminal 1(L) and/or 3(L). Standby power consumption then increases only by 0.1W. - General control voltage 12-230V AC/DC. Operating voltage is the same as control voltage. - Functions are selected using MODE and SET buttons according to the operating instructions. - Functions are displayed on the device's display and can also be disabled if needed. - Accumulated operating time is always displayed on the screen. First hours (h) are shown, then months (m) with one decimal place accuracy. - Thanks to the bistable relay function, possible coil-related power losses and heat generation are avoided even when the relay is in operation. - After installation, wait until the short automatic synchronization ends before connecting devices to the network. This product description is an automated translation of the original Finnish description.