PUSHRELAY ESR61NP-230V+UC

Impulse relay with working current relay function for mounting in a control panel. Also available with adjustable delay-off, delay-off with warning, and push-button controlled continuous-on function.

• 1 non-potential-free normally open (NO) contact 10A/250V AC.
• 230V LED load up to 600W.
• Incandescent lamp load up to 2000W.
• Standby power consumption only 0.7 watts.
• Designed for panel mounting, length 45mm, width 45mm, depth 18mm.
• Neutral point connection for protection of contacts and load.
• Modern hybrid technology combining the advantages of wear-free electronic control and high-performance special relays.
• Due to bistable relay operation, energy loss and heat generation from the coil are avoided even when the relay is in use.
• The relay contact can be open or closed when installed. It is synchronized during the first operation.
• Control voltage 230V. Additionally, electrically isolated general control voltage 8-230V AC/DC.
• Supply and switching voltage 230V.
• Extremely quiet switching sound.
• Adjustable operating time up to 120 minutes in ESV mode.
• A signaling push button with a current of up to 50mA can be connected to the control input.
• In case of voltage interruption, outputs are switched off in a pre-defined sequence.

If the operating time is set to minimum in ESV mode, the delay-off function is disabled and the standard impulse relay function ES is activated. The standard relay function ER is also selectable. If ER is selected, the current through the indicator lamp on the switch is not permitted; only the control input A1-A2 may be used. If the delay-off warning function is enabled, lamps (e.g., in stairwells) flash approximately 30 seconds before the time expires. This repeats three times with decreasing intervals. If the continuous lighting function is selected, it can be activated by pressing the buttons for more than 1 second. The function automatically switches off after 2 hours or when the button is pressed for more than 2 seconds. If both the delay-off warning and continuous lighting functions are selected, the delay-off warning is activated before the continuous lighting turns off.

This product description is an automated translation of the original Finnish description.