PUSHRELAY ES75-12..24V UC

Electronic impulse relay. Suitable for mounting in luminaires. 1 non-potential-free normally open (NO) contact 10A/250V AC. 230V LED load up to 200W. Incandescent lamp load up to 500W. Standby power consumption only 1W. Flush mounting. Length 80mm, width 40mm, depth 28mm. Integrated transformer provides galvanic isolation between control circuit and switching circuit in compliance with the safety standard for extra-low voltage (SELV) EN 60669-2-2. From production week 18/18 onwards, two MOPP safety requirements are met according to standard EN 60601-1. Activation by internal voltage or external control voltage 12-2 V DC, control current 10mA at 24V. Continuous power supply 230V. Maximum 10A fuse required. Incandescent and halogen lamp load up to 500W (lamps max. 150W) and fluorescent lamp load with conventional ballast up to 1000VA. Fluorescent lamp load with electronic ballast up to 300VA. Installation temperature range -20°C to +50°C. Minimum command pulse duration/command pause 20/300ms. Low-voltage side connections: 4-pin terminal block STOCKO MKF 13264-6-0-404; 230V connections: 6-pin strip terminal with plug connectors. Maximum conductor cross-section 2.5mm². One STOCKO plug is supplied with each device. This product description is an automated translation of the original Finnish description.