PUSHRELAY ES12Z-200-UC

Impulse relay with potential-free contacts and central control. Different central control functions selectable via front panel rotary switches. - 2 potential-free normally open (NO) contacts 16A/250V AC. - 230V LED load up to 200W. - Incandescent lamp load up to 2000W. - Standby consumption only 0.03-0.4 watts. - Modular unit for rail mounting according to DIN-EN 60715 TH35 standard. - 1 module = width 18mm, depth 58mm. - Modern hybrid technology combining the advantages of wear-free electronic control and powerful special relays. - General control voltage 12-230V AC/DC. - Central control inputs 8-230V AC/DC. Central control ON and OFF input terminals are galvanically isolated from local general control inputs. Operating voltage must be the same as control voltage. - Extremely quiet switching sound. - Indicator light current when control voltage is at least 110V is maximum 50mA in rotary switch positions 1-3 and 5-7. - Thanks to bistable relay operation, energy loss and heat generation from the coil are avoided even when the relay is in use. - After installation, wait until the short automatic synchronization ends before connecting devices to the network. - Maximum current in both contacts 16A, 230V. - LED indicator light showing contact position, which starts flashing after 15 seconds if the button is stuck, except in rotary switch positions 4-8. - Also available with 1NO+1NC contacts, ES12Z-110-UC (No. 27 035 73) This product description is an automated translation of the original Finnish description.