DIMMER DIN, EUD12D-UC, 100W LED

Digital multi-function dimmer for DIN rail mounting. - Modular unit for rail mounting according to DIN-EN 60715 TH35 standard. - 1 module = width 18mm, depth 58mm. - General dimmer for up to 400W lamps and luminaires, depending on ventilation conditions. - Suitable for dimmable energy-saving lamps (ESL) and dimmable 230V LED lamps, depending on lamp electronics and dimming technique. - General control voltage 12-230V AC and additionally general voltage central control ON and OFF inputs 12-230V AC for centralized on/off switching. - Control inputs are electrically isolated from the supply voltage and switching voltage. - Neutral switching with soft on/off to protect the load. - In the event of a power failure, the dimmer’s switching state and lighting level are stored. If required, the dimmer reactivates at the stored lighting level when the supply voltage is restored. - Indicator light current up to 5mA, with control voltage of at least 110V (not in DSD mode). - Automatic electronic overload protection and overheat protection with shutdown. - Functions and times are set using the MODE and SET buttons on the front panel with an LCD display, as illustrated in the user manual or quick guide. - Keypad lock can also be set. - Can be controlled with any spring-return 12-230V AC push button. - Can also be controlled with separate spring-return 12-230V AC push buttons for up/down. **Dimmer functions:** **EUD - General dimmer** - Settings for dimming speed, minimum and maximum lighting levels, memory function, and soft on/off speed, plus selectable priority for central control inputs. Selectable for energy-saving lamp or LED operation (for luminaires requiring rising edge/leading edge/trailing edge dimming). Dimming via push button: short press for on/off, long press for up/down dimming. **DSD - General dimmer, up/down dimming with separate push buttons** - General dimmer as EUD, but up/down dimming with two separate directional push buttons. Centrally controllable via general voltage inputs (8-230V AC). **Udo - General dimmer with configurable off-delay** - General dimmer as EUD, additionally with adjustable off-delay between 1-99 minutes. Selectable off-delay warning via dimming, with adjustment range of 1-3 minutes. **STS - Step lighting controller with selectable dimming-based off-warning** - On/off, light level adjustment, and continuous on operation can be controlled via push buttons. Off-delay adjustable between 1-99 minutes. Selectable off-delay warning via dimming, with adjustment range of 1-3 minutes. **MIN - General dimmer, turns on at MIN level and brightens to MAX level in set time** - General dimmer that turns on at the preset minimum lighting level when control voltage is applied. Lighting gradually brightens to maximum level over the set dimming time (1-99 minutes). When control voltage is interrupted, the device immediately switches off, even during the time period. **MMX - General dimmer, same as MIN but switches off at MIN level after set time** - General dimmer operating otherwise as MIN setting, but when control voltage is interrupted, dimming downward continues until the preset minimum lighting level is reached, after which the device turns off. **CG - Pulse generator with adjustable on/off times** - Pulse generator with adjustable on/off times between 0.1 - 9.9 seconds. Maximum lighting level adjustable between 3 - 99%. **R - Switching relay with soft on/off adjustment** - Switching relay with soft on/off adjustment between 0.1 - 9.9 seconds. Maximum lighting level adjustable between 3 - 99%. **ON - Always on** **OFF - Always off** This product description is an automated translation of the original Finnish description.