WIRELESS ACTUATOR DIMMER FD62NP-230V

Wireless dimmer for mounting in a junction box, without N-wire. Up to 32 different wireless master buttons (on/off and dim up/down buttons from the same side), direction buttons (on/off and dim up/down buttons from opposite sides), central control button, motion sensor, or remote control can be programmed to one dimmer. A single wireless button can control an unlimited number of dimmers. The dimmer also has a wired button input, allowing this wireless dimmer to be controlled not only by a wireless button but also by any conventional wired spring-return 230V button. • Flush mounting, length 49mm, width 51mm, depth 20mm. • Terminal blocks for conductor cross-sections 0.2mm² - 2.5mm². • Supply, switching, and control voltage 230V. • Dimmable trailing edge/LED lamps up to 200W and leading edge lamps up to 40W, depending on ventilation. • 230V incandescent and halogen lamps up to 200W, depending on ventilation. • Minimum load: 20W for trailing edge, 8W for leading edge. • Neutral connection with soft on/off to protect the load. • MOSFET. • No inductive transformers. • Child lock and sleep function. • Standby power consumption only 0.6 watts. • Dimming level is saved when turned off (memory function). • Automatic electronic overload and thermal protection. • Use of illuminated buttons is not permitted. • Up to 32 different wireless master buttons or direction buttons can be programmed to one dimmer (see user manual, quick guide, or tutorial video). This product description is an automated translation of the original Finnish description.