WIRELESS SINGLE-PHASE ENERGY M FWZ12-65A

• Wireless single-phase energy meter, maximum current 65 A.
• Standby power consumption only 0.5 W.
• Modular unit for rail mounting according to standard DIN-EN 60715 TH35.
• 1 module = width 18 mm, depth 58 mm.
• The meter measures the current between input and output and transmits the reading to the Eltako wireless network.
• Accuracy class B (1 %).
• Monitoring of readings via computer using the Eltako Wireless Building Visualisation and Control Software GFVS or display panel FEA65D.
• GFVS-Energy supports up to 100 transmitter modules and GFVS 4.0 up to 250 transmitter modules.
• Internal power consumption of 0.5 W is not measured or displayed.
• This meter, like other meters without a conformity certificate (e.g., MID), is not suitable for billing.
• A single-phase conductor with a maximum current of 65 A can be connected to the meter.
• If the expected load exceeds 50 %, a spacing of ˝ module must be maintained next to adjacent devices. Use the DS12 spacer if necessary.
• Startup current 40 mA.
• Consumption is stored in non-volatile memory and appears immediately after power restoration.
• Wireless messages: A message is transmitted every 60 seconds if the current state changes by at least 10 percent.

This product description is an automated translation of the original Finnish description.