CEILING CUP WIRE CEILING CAP SMALL Ø31 1 P

Product code
4265355
RIP1002 CEIL.CUP 31 MM
General and task lighting for offices and other public spaces. The luminaire is suitable for both direct lighting and a combination of direct and indirect lighting. The range also includes solutions for the most common installation types in office environments. Structure - Body made of white powder-coated steel sheet, gray APH models (RAL9006) on request - Bottom reflector made of polished anodized aluminum - Glare shield made of anodized aluminum - Grille locks and hinges into the body - Models: - Downlight models - Indirect lighting models (Y = small upper light openings), upper light approx. 10% - Down/uplight models (A = large upper light openings), upper light approx. 40% - Panel luminaire without glare shield. Reflector asymmetrical - End caps with knockouts (2 per end, Ø 21mm), available without knockouts on request - Multi-lamp models equipped with a tube power-identifying connection device, powers 35/49W and 28/54W Installation - Installation directly onto ceiling surface or suspension rail. Single or ramp installation (with RAMPPI/APV installation kit) - Suspension to luminaire rail with AMJK2 / AMJK2V spring fittings - Cable suspension - Recessed installation with separate recess frame - Recess opening dimensions = luminaire dimensions + 10 mm - APM models (module) mounted on T-rails or with MP2 fittings to flat ceiling - -o- 5x2.5 mm² (downlight models and controllable) - -o- 3x2.5 mm² (Y/A models) - Downlight models: Connection point in the center of the luminaire along its length. Cable openings in the center of the luminaire along its length and beside the suspension point - Y/A models: Connection point at the end of the luminaire, beside the suspension point. Cable openings beside the suspension point - Installation accessories available separately Control methods - Switch-Control (ES) - 1-10V (ELD) - iDim - Dali (ED) On request - With pull switch, connecting cable, light sources - With cable suspension (TKAAPELIRIP), 3 x 0.75 mm² gray - In gray (RAL9006) - With white steel louvered grille - With touch rail brackets This product description is an automated translation of the original Finnish description.

Product details

Technical specifications

Product class (ETIM)Mechanical accessories/spare parts for luminaires (EC002557)
Type of accessory/spare partBlind cap
ColourWhite
MaterialPlastic
Length56 mm
Width31 mm
Height31 mm

Product codes

SAPADU191
STK4265355
PLC4265355
GTIN/EAN6418584155889
Manufacturer part numberRIP1002
Vendor material number4265355

Basic information

Package measurements (L x W x H)56 x 31 x 31 mm
Package volume0.048 l
Package weight0.01 kg
Base uniteach
Package units1 / 96 / 16
Package contents
UNSPSC39111501
BrandENSTO
VendorLEGRAND FINLAND LIGHTING

Documents (3)

Brochures & documents