SEA. IND. LUM. MAMBAMINI AGRO+ L150 IP66 9400LM MB60

MAMBAmini Agro+

Agro+ is a chemical-resistant and sealed (IP66) general lighting solution suitable for various environments. Its maximum power can be selected via a dip switch from several options.
Three different optics (30°, 60°, and 90°) enable Agro+ to be used both in open areas and between shelves.
It is excellently suited for applications such as livestock shelters, industrial, and production facilities.

The Agro+ housing is made of fiberglass-reinforced, UV-protected, chemical-resistant polyester, and the lens is UV-protected acrylic.
The lamp's fire rating is UL 94 HB and it has a D marking.

Agro+ is always through-wired. The detachable component board with EnstoNet simplifies installation.
The luminaire is available with DALI control or wireless Casambi control. Also available in sensor versions RS, RS DIM, and BTDA.

RS = microwave sensor
The microwave sensor turns the lights on upon motion and turns them off after a delay. The sensor's sensitivity, operating time, and dusk-to-dawn settings can be adjusted using controls on the sensor itself.

The RS DIM version features corridor functionality.
The lighting level is approximately 10% when no one is present in the room and immediately switches to 100% lighting level upon entry.

RS luminaires can also be grouped together.
Two master luminaires equipped with sensors can be connected so that both control the lighting.
Slave luminaires without sensors can also be connected to the master luminaire.
In the RS DIM version, slave luminaires must be DALI luminaires. Master and slave luminaires must be connected to the same fuse and the same phase.

BTDA = Bluetooth-enabled microwave sensor. Each luminaire must have its own sensor, enabling completely wireless control.

Maximum mounting height for RS/RS DIM/BTDA versions: 4 m

Construction: Housing made of fiberglass-reinforced, UV-protected polyester (RAL7035), chemical-resistant. Seals made of polyurethane. Component board made of white-coated galvanized steel sheet.
Installation: Mount to ceiling or luminaire suspension rail using the included quick-release fittings. Horizontal cable brackets are included as standard.
Light source: 4000K
Wiring: Cable entries with rubber seals on both ends.
ON/OFF: 2 pieces 5-pin spring terminal connections, 3-core through-wiring 5x2.5 mm²
DALI: 2 pieces 5-pin spring terminal connections, 1-core + DALI through-wiring 5x2.5 mm²
Enclosure rating: IP66
Color temperature: 4000 K
Operating temperature: -20 … +35 °C
IK rating: IK03
Fire rating (UL94): HB and chemical-resistant D marking
Luminous output: Ra>80, SDCM 3
Lifespan: Remaining luminous flux of the luminaire, LLMF (lamp lumen maintenance factor), 100,000 h @ Ta25°C: 0.80 (80%). LED module lifespan: L80B50, 100,000 h @ Ta 25 °C. Theoretical lifespan of the driver calculated at 0.1% / 1000 h @ Ta25°C (Min -20 / Max +35 °C) with failure rate: 100,000 h
Warranty: 5 years


This product description is an automated translation of the original Finnish description.