SENSOR LUMINAIRE NAIAD 25G3 NAIAD L120 4300LM 840 O PIR

Naiad LED PIR is an easily installed IP23-class low-profile general lighting fixture with a PIR sensor. Naiad LED PIR is suitable for locations where lights are required to operate via presence (infrared) detection. The PIR is equipped with an infrared sensor that turns the lights on upon entry and turns them off with a delay upon departure. The sensor-controlled light can control slave lights. Factory default setting for the PIR sensor delay is 5 minutes. In the PIR DIM version, the corridor function is active, meaning the lights dim but do not turn off. The light level is approximately 10% when no one is present in the room and instantly increases to 100% upon entry (factory setting, delay time 5 minutes). The sensor-controlled light can control slave lights. Slave lights must be DALI lights. The factory settings of the PIR and PIR DIM sensors can be adjusted separately using a dedicated remote control (7009046). Maximum mounting height for PIR lights is 3 m. Thanks to the satin opal diffuser, the light output is even and glare-free. Available in three different lengths: 602, 1202, and 1502 mm. Features

• White housing and mounting plate
• Satin opal diffuser
• Luminous flux 2100 - 5500 lm
• Lifetime LLMF 100 000 h @25 °C 80%
• Operating temperature -20 °C...+35 °C
• D-marked, Ra>80, SCDM 3
• Mounting directly to ceiling or light rail
• 5-year warranty

This product description is an automated translation of the original Finnish description.