ATTENDANCE PACKAGES IR PD230

Extronic PD-230 230V AC with IR sensor unit. The package includes one sensor PD-231, the relay unit PS-230, and a cable connecting the sensor to the relay unit. The relay unit is connected to the mains electricity and supplies 12V voltage to the PD-231 sensors. The lighting load is connected to the relay unit.

The monitoring area can be extended with the PD-231 sensor. With a standard lens, the large monitoring area is 45x45 m. The PS-230 can supply power to up to five PD-231 sensors.

Load Capacity

• Resistive load cos ?=1: 2300 W
• Fluorescent lamps cos ?=0.5: 1150 W (max. 16 lamps)
• LED: 800 W (max. 13 lamps)
• Small fluorescent lamps: 800 W (max. 13 lamps)

Delay adjustment 2 sec - 20 min.

The PS-230 relay unit must be protected by a fuse of maximum C10A.

A push button can be connected to the PS-230 relay unit to manually turn the lights on and off.

The PD-231 sensor has a built-in light sensor that prevents the lights from turning on if there is sufficient ambient light. The lights can be turned on via the push button even if the light sensor indicates sufficient illumination. If the light sensor is set to Off, it is disabled.

The sensor has a jumper setting Auto/Man. In Auto mode. In Auto mode, the sensor always turns on the lights in the area (if the light sensor is in Off mode or if it is dark). In Man mode, the lights must be turned on manually via the push button, but they turn off automatically.

This product description is an automated translation of the original Finnish description.