NAIL ANCHOR FISCHER FNA II 6x30/5

The FNA nail anchor is quick and easy to install by drilling and hammering it into the substrate; no tightening torque is required. Once installed, the FNA II anchor automatically expands under load, pulling the conical expansion sleeve and spreading against the hole walls. The FNA II nail anchor is CE/ETA OPTIO 1 approved for attachment with multiple fasteners, including in tension-loaded zones. The FNA II nail anchor is used for securing suspended ceilings, piping, cable trays, wall panels, windows, fire protection panels, etc. Extremely easy to install: Drill, hammer in – done! Low hammering force: 2-4 hammer blows and the FNA II is installed. Minimum anchor depth of just 25 mm reduces drilling time, saving time and minimizing hits on reinforcement. Maximum tensile load values up to 1.6 kN are permitted. Small edge and center distances suitable for applications with small component dimensions (e.g., openings as narrow as 10 cm). Component thickness must be at least 8 cm. Testing is no longer necessary! The first ceiling anchor with European Technical Approval for concrete with low strength C12/15 (B15). CE/ETA approved. Fire rated R120 This product description is an automated translation of the original Finnish description.