BRANCH CONNECTOR FLAMCO T-PLUS 1x3/4x1 STEELPIPE

T-plus explosion connector for steel pipes to enable quick and easy T-branching while the system is in operation. The system does not need to be emptied or depressurized to create a new branch. The firing mechanism simplifies installation and eliminates the possibility of errors. Inside the connector, a cutting piston moves under the force of an internal explosion, creating a clean hole in the pipe. The cut piece remains inside the connector in its designated chamber. No machining debris enters the pipeline. Branching is possible even in confined spaces. The T-plus connector is suitable for use in heating and cooling systems, domestic water systems, and sprinkler and compressed air networks. The T-plus connector saves installation time and costs. Branches can be created while the system is operational. No draining is required, so air or dirt cannot enter the network. The product itself seals around the pipe, providing a perfect seal. Features

• corrosion-resistant coating
• single-use firing mechanism included in the package
• easy pre-installation thanks to click-in technology (from size 1˝" onwards)
• maximum operating pressure 25 bar
• maximum operating temperature 130 °C

For steel pipes (St33, St34, St35, St37) ˝" - 3"

• for threaded pipes: NEN 3257 C heavy, DIN 2441, BS 1387 heavy (or lighter)/ISO 9329-1
• for seamless steel pipes: DIN 2448/1629 Bl.3, St 35 / ISO 9330-1
• for welded steel pipes: DIN 2458/1626 Bl.2, St 35

Material numbers

• 1.0035 (St33)
• 1.0034, 10305 (St34)
• 1.0308, 10345 (St35)
• 1.0036, 1.0037, 1.0038, 1.0039, 1.0255, 1.0254 (St37)

This product description is an automated translation of the original Finnish description.