Roll over image to zoom in
FLIR TEST ADAPTER EV45-T2
FLIR EV45-T2 – Test adapter for EV charging stations (Type 2 connector and Type 1 adapter)
The FLIR EV45-T2 is a professional-grade test adapter for testing the safety and functionality of electric vehicle supply equipment (EVSE). It enables rapid and safe verification of grounding, wiring connections, residual current device (RCD) functionality, and charging state simulation, as well as identification of the charging station’s maximum current. The EV45-T2 is compatible with both Type 2 and Type 1 equipped charging stations and complies with IEC 61851-1 EV safety standards.
Features:- Verifies protective earth (PE) and electrical installation correctness.
- Tests the operation of the residual current device (RCD).
- Displays the charging station’s maximum current (13 A, 20 A, 32 A, 63 A).
- Supports Type 2 connector with included Type 1 adapter (SAE J1772).
- Enables voltage and frequency measurement when used with the FLIR DM286 multimeter.
- Compatible with the FLIR IM75-2 insulation tester for EV cable insulation tests.
- Complies with CAT II 300 V and IEC 61010-1 safety requirements.
- Measurement connectors: L1, L2, L3, PE, N
- Maximum voltage: 250 V (single-phase), 430 V (three-phase), 50/60 Hz
- Charging state simulation: A (disconnected), B (connected), C (charging), D (charging with ventilation), E (fault state)
- Protection class: CAT II 300 V
- Operating temperature: -10…+50 °C, RH max. 85 %
- Dimensions: 237 × 65 × 56 mm
- Weight: 600 g
- Power source: 4 × AA batteries, operating time approx. 100 h
- Warranty: 3 years
The FLIR EV45-T2 is a reliable tool for testing, servicing, and commissioning electric vehicle charging stations – ensuring the safety of charging equipment.
This product description is an automated translation of the original Finnish description.