WALLVENT FRESH TL100C

The TL100C wall vent is designed for continuous ventilation. Thanks to the vent's design, incoming air is directed only upward and sideways. The rapid mixing of air with the warm air near the ceiling significantly reduces the draft sensation, provided the vent is installed correctly. It is also suitable for use with underfloor heating. The vent is adjusted using a control lever located under the cover.

The sales package includes the vent unit with a standard filter, condensation insulation, and storm protection, as well as a telescopic through-pipe and an exterior grille. The filter is located in a filter cassette, making filter replacement clean and easy. The filter cassette also includes storm protection. The telescopic duct length is adjustable between 185 and 340 mm, with a diameter of 98/104 mm. The duct can also be installed in a wall approximately 150 mm thick by shortening both ends of the duct, while retaining the telescopic feature.

External dimensions of the vent cover: height 186 mm, width 176 mm, depth 56 mm. The inner surface of the cover features an effective condensation insulator. The storm protection reduces the entry of strong winds and saves heating energy.

Installation

The TL100C wall vent is intended for installation in bedrooms, living rooms, children's rooms, and workspaces. The recommended location is as high as possible on the wall—and if the apartment has a radiator, preferably above it. This achieves the most comfortable air flow into the room. Since the incoming air is primarily directed upward, the cold outdoor air reaches a comfortable temperature very close to the vent.

Maintenance

To ensure good air quality and airflow, the filter should be cleaned or replaced 1–2 times per year. The filter is located in a filter cassette accessible from behind the vent cover, at the duct opening. The filter basket can be easily pulled out from the vent body. The standard filter can be washed with lukewarm water. The dust filter and FlimmerFilter high-efficiency filter must always be replaced with new ones.

This product description is an automated translation of the original Finnish description.