WALLVENT FRESH TL80DE-DBS

A wall vent with a duct designed for continuous ventilation, which attenuates noise coming from outside. The vent is adjusted (and closed) by changing the opening angle of the lid. The incoming air is distributed upward and sideways, eliminating drafts. It is also compatible with underfloor heating. The vent lid can be painted or wallpapered.

The filter of the TL-DE model vent is neatly housed in a filter basket, making filter replacement clean and easy. The filter basket also includes a storm guard. The duct diameter is 81/124 mm. The internal dimensions of the vent are 160 x 160 mm, and the lid height from the wall surface is only 21 mm when closed.

The package includes the vent’s inner unit, condensation insulation, a standard filter in the filter basket, a storm guard, a dB-through pipe, pipe connectors, and an outer grille.

The vent lid angle can be adjusted to four different positions. The air flow pattern has been precisely designed to be compatible with underfloor heating, directing incoming air upward and sideways. The mixing of fresh air with room air is highly efficient. Even very close to the vent, cold outdoor air has already reached a comfortable temperature. The vent is intended for installation in a bedroom or living room. The recommended location is as high as possible on the wall. If the apartment has a radiator, it is preferable to install it above the radiator to achieve the most pleasant air flow in the room.

The TL80DE-dB is exceptionally suitable for use with underfloor heating thanks to its unique airflow pattern. When used with underfloor heating, the vent should be placed farther from the window. To ensure good air quality and airflow, the filter should be cleaned or replaced 1-2 times per year. The standard filter can be washed with mild detergent water. The pollen filter and FlimmerFilter performance filter must always be replaced with new ones. The filter is located in the filter basket, accessible from behind the vent lid. The filter basket can be easily removed by first detaching the lid from its lower fasteners and lifting the lid upward. The filter basket is then gently pulled out from the vent body.

The wall vent is made of ABS plastic, and the outer grille is made of highly environmentally friendly polypropylene (PP) plastic.

This product description is an automated translation of the original Finnish description.