WALL VENT FRESH TL-DE INTERNAL PART Ø98/100mm

The new TL-DE replacement vent is designed to upgrade old F90 or F100 or similar exhaust vents to a modern, airtight, and stylish version. The TL-DE replacement vent is shaped to direct incoming outdoor air mostly upward, allowing it to mix efficiently with the warm air near the ceiling, significantly reducing the sensation of drafts. You can therefore upgrade your old wall vent simply by replacing the inner unit while keeping the existing through-wall pipe and outer grille. The sales package includes the vent’s inner unit with a filter basket, a standard filter, and a condensation insulator, along with an outlet duct with an outer diameter of Ø98 mm (pipe length 110 mm, includes filter basket, to be installed into the existing through-wall channel). The external dimensions of the replacement vent are 160x160 mm, and its depth when mounted flush against the wall and closed is 21 mm. Airflow is adjusted by changing the opening angle of the vent lid. The vent is intended for installation in a bedroom or living room. The recommended location is high on the wall, and if the apartment has a radiator, it is best placed above the radiator to achieve the most comfortable air flow into the room. To ensure good air quality and airflow, the filter must be cleaned or replaced 1-2 times per year. This is simple: open the lid and remove the filter basket from the duct, then clean or replace the filter, even in a sink, so that dust does not settle in the living or bedroom. Optional accessories include a G-class pollen filter (LVI 8823706) and an F8-class allergy filter, FlimmerFilter (LVI 8823522). These filters are not washable. The FlimmerFilter replaces the filter basket. This product description is an automated translation of the original Finnish description.