FIRE INDICATOR ID100 DC 10-30 V +5…+40 LED

Conventional optical smoke detector – features

• A state-of-the-art CPU enables sophisticated calculation algorithms and reduces false alarms.
• The circuit board is fully coated to prevent contamination and oxidation.
• The smoke detection chamber is easily accessible for cleaning.
• A metal mesh prevents insects from entering the detection chamber – mesh aperture is less than 500 µm.
• A fully dust-tight top section protects the detection chamber from contamination and condensation.
• Common base for conventional and addressable detectors.
• With a compatible relay card, any standard base can be converted into a relay output base.
• A short-circuit switch restores detector line continuity when the detector is removed from the base; when the detector is reinserted, the short-circuit switch automatically resets.
• During commissioning and maintenance, detectors can be disconnected from the control unit and connected to the EITK1000-TOOL programming device.
• The EITK1000-TOOL can be connected to a PC or used independently thanks to internal batteries.
• VERSA technology enables identification of each conventional detector connected to a detector line.

Detector operation settings on a per-detector basis

• Smoke sensitivity adjustment
• Temperature range and rate-of-rise adjustment
• Red and yellow LED indicators and remote output can be manually activated
• All faults can be reported (e.g., chamber contamination, chamber malfunction, heating element fault)
• Each detector stores in memory the last 5 minutes of smoke and temperature values, facilitating the determination of alarm causes and conditions

The following modes can be selected from combination detectors:

• OR mode (smoke or heat)
• AND mode (smoke and heat)
• Heat only
• Smoke only
• PLUS mode

This product description is an automated translation of the original Finnish description.