TEMPERATURE DETECTOR ED200

Addressable heat detector.

• Latest technology CPU enables demanding computation algorithms and reduces false alarms

• The circuit board is fully coated to prevent contamination and oxidation

• The smoke detection chamber is easy to open for cleaning

• Metal mesh protects against insect entry into the detection chamber; mesh aperture smaller than 500 um

• Completely dust-tight upper section protects the detection chamber from contamination and condensation

• Common base (conventional and addressable detector)

• Thanks to a compatible relay card, any standard base can be converted into a relay output base

• A short-circuit switch restores detector line continuity when the detector is removed from the base; when the detector is reinserted, the short-circuit switch automatically resets

• During commissioning and maintenance, detectors can be disconnected from the control panel and connected to the EITK1000-TOOL programming device

• The EITK1000-TOOL programming device connects to a PC or operates independently (standalone) thanks to internal batteries

• VERSA technology enables identification of each conventional detector connected to a detector line

• Detector-specific configuration of detector and LED indicator operation:

• • Smoke sensitivity adjustment

• • Temperature range and rate-of-rise adjustment

• • The following modes can be selected for combination detectors:

• • • OR mode (smoke or heat)

• • • AND mode (smoke and heat)

• • • Heat only

• • • Smoke only

• • • PLUS mode

• • Red and yellow LED indicators and remote output can be manually activated

• • All faults can be reported (chamber contamination, chamber malfunction, heat element failure, etc.)

• Each detector stores in memory the last 5 minutes of smoke and temperature values, which greatly assists in investigating the causes and conditions leading to an alarm

This product description is an automated translation of the original Finnish description.