BRANCH CONNECTOR NOTAP 55-65mm DN50 BRANCH DN25

Product code
0489209

With NoTap branch connectors, you can make repairs and connections without first draining the system. You save a lot of time and money, and the work is also very easy.

Branch connector without check valve: Connectors without a check valve are used in larger branches and when maximum flow is desired. A full-bore ball valve is always screwed onto these connectors when there is pressure in the system.

Benefits:
  • 1. The system does not need to be drained.
  • 2. The system does not need to be refilled and vented, resulting in lower installation costs.
  • 3. Installation is simpler because no welding, cutting, or soldering is required.
  • 4. Can be used with all types of pipe materials, including black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
  • 5. Saves energy because heated water does not need to be drained.
  • 6. Can be used in heating, domestic water, compressed air, and cooling systems.
  • 7. No hot work required.
  • 8. Pipe corrosion is reduced because no new oxygen-rich water needs to be added.
  • 9. Environmentally friendly because contaminated water does not need to be discharged from the system.
  • 10. No contaminants enter the system during installation.
  • Follow local installation regulations!
Technical specifications for connectors without check valve:
  • Pipe sizes: Outer diameter 26-335 mm (DN 20-DN 250)
  • Branch size: DN 25, DN 40, DN 50 or DN 65
  • Drill hole: Ř 19-57 mm
  • Max. system pressure: 16 bar / 10 bar (pipe diameter DN 150 and larger)
  • Max. temperature: +95 °C
  • Min. temperature: –10 °C
  • Pipe materials: All metal pipes, e.g., black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
  • Medium: Domestic water, heating, and cooling systems (glycol- or salt-based heat transfer fluids) and compressed air.
  • Connector materials: Zinc-resistant brass and stainless steel (NoTap Big available in acid-resistant version)
  • Seal: EPDM (NBR available on request)
This product description is an automated translation of the original Finnish description.

Product details

Technical specifications

Product class (ETIM)Broaching saddle (EC011014)
MaterialBrass
Material inlayEthylene-propylene diene monomer rubber (EPDM)
Suitable for pipe diameterDN 50
Mounted on pipeOther
ConnectionOther

Product codes

SAPCZQ509
HPAC0489209
PLC0489209
GTIN/EAN6415804892098
Manufacturer part number101125
Vendor material number0489209

Basic information

Package measurements (L x W x H)120 x 110 x 60 mm
Package volume0.792 l
Package weight0.73 kg
Base uniteach
Package units1
Package contents
UNSPSC30181507
BrandGEBO
VendorGEBO FINLAND OY

Documents (3)

Brochures & documents