
Roll over image to zoom in
BRANCH CONNECTOR NOTAP 74-83mm DN65/Cu76,1 DN25
Product code
0489211
With NoTap branch connectors, you can make repairs and connections without first draining the system. You save a lot of time and money, and the work is also very easy.
Branch connector without check valve: Connectors without a check valve are used in larger branches and when maximum flow is desired. A full-bore ball valve is always screwed onto these connectors when there is pressure in the system.
Benefits:- 1. The system does not need to be drained.
- 2. The system does not need to be refilled and vented, resulting in lower installation costs.
- 3. Installation is simpler because no welding, cutting, or soldering is required.
- 4. Can be used with all types of pipe materials, including black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
- 5. Saves energy because heated water does not need to be drained.
- 6. Can be used in heating, domestic water, compressed air, and cooling systems.
- 7. No hot work required.
- 8. Pipe corrosion is reduced because no new oxygen-rich water needs to be added.
- 9. Environmentally friendly because contaminated water does not need to be discharged from the system.
- 10. No contaminants enter the system during installation.
- Follow local installation regulations!
- Pipe sizes: Outer diameter 26-335 mm (DN 20-DN 250)
- Branch size: DN 25, DN 40, DN 50 or DN 65
- Drill hole: Ř 19-57 mm
- Max. system pressure: 16 bar / 10 bar (pipe diameter DN 150 and larger)
- Max. temperature: +95 °C
- Min. temperature: –10 °C
- Pipe materials: All metal pipes, e.g., black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
- Medium: Domestic water, heating, and cooling systems (glycol- or salt-based heat transfer fluids) and compressed air.
- Connector materials: Zinc-resistant brass and stainless steel (NoTap Big available in acid-resistant version)
- Seal: EPDM (NBR available on request)
Product details
Technical specifications
Product class (ETIM)Broaching saddle (EC011014)
MaterialBrass
Material inlayEthylene-propylene diene monomer rubber (EPDM)
Suitable for pipe diameterDN 65
Mounted on pipeOther
ConnectionOther
Product codes
SAPCZQ511
HPAC0489211
PLC0489211
GTIN/EAN6415804892111
Manufacturer part number101127
Vendor material number0489211