BRANCH CONN. CHECK VALVE NOTAP 39-45mm DN32/Cu42

With NoTap branch connectors, you can make repairs and connections without first draining the network. You save a lot of time and money, and the work is also very easy.

Branch connector with check valve: A check valve seat is used when making smaller branches, installing saddle taps, and punching pipes. When making branches, a coupling is used that opens the check valve. When drilling a hole for a saddle tap, an insertion pipe adapter is used. When punching a pipe, a ball tool is used to push the ball into the pipe.

Benefits:

• 1. The network does not need to be drained.
• 2. The network does not need to be refilled and vented, resulting in lower installation costs.
• 3. Installation is simpler because no welding, cutting, or soldering is required.
• 4. Can be used with all types of pipe materials, including black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
• 5. Saves energy because heated water does not need to be drained.
• 6. Can be used in heating, domestic water, compressed air, and cooling systems.
• 7. No hot work required.
• 8. Pipe corrosion is reduced because no new oxygen-rich water needs to be added.
• 9. Environmentally friendly because dirty water does not need to be discharged from the network.
• 10. No contaminants enter the network during the work phase.
• Follow local installation regulations!

Technical specifications for check valve-equipped seats:

• Pipe sizes: Outer diameter 14 mm–125 mm (Cu 15–DN 65)
• Branching seat: DN 20 (Ø 14–23 mm) or DN 25 (Ø 24–83 mm)
• Insertion pipe installation: Outer diameter 24 mm–125 mm (DN 20–DN 65)
• Punching: Outer diameter 14 mm–60.3 mm (Cu 15–DN 50)
• Drill hole: Ø 8.4 mm (Ø 14–23 mm) or 14.4 mm (Ø 24–65 mm)
• Max. network pressure: 16 bar / 10 bar (pipe diameter DN 65)
• Max. temperature: +95 °C
• Min. temperature: –10 °C
• Pipe materials: All metal pipes, such as black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
• Medium: Domestic water, heating, and cooling systems (glycol- or salt-based heat transfer fluids) and compressed air.
• Seat material: Zinc-resistant brass
• Seal: EPDM (NBR available on request)

This product description is an automated translation of the original Finnish description.