
Roll over image to zoom in
BRANCH CONNECTOR NOTAP BIG 70,77mm Cu70 BRANCH DN50
Product code
0489257
With NoTap branch connectors, you can make repairs and connections without first draining the system. You save a lot of time and money, and the work is also very easy.
Branch connector without check valve: Connectors without a check valve are used in larger branches and when maximum flow is desired. A full-bore ball valve is always screwed onto these connectors when there is pressure in the system.
Benefits:- 1. The system does not need to be drained.
- 2. The system does not need to be refilled and vented, resulting in lower installation costs.
- 3. Installation is simpler because no welding, cutting, or soldering is required.
- 4. Can be used with all types of pipe materials, including black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
- 5. Saves energy because heated water does not need to be drained.
- 6. Can be used in heating, domestic water, compressed air, and cooling systems.
- 7. No hot work required.
- 8. Pipe corrosion is reduced because no new oxygen-rich water needs to be added.
- 9. Environmentally friendly because contaminated water does not need to be discharged from the system.
- 10. No contaminants enter the system during installation.
- Follow local installation regulations!
- Pipe sizes: Outer diameter 26-335 mm (DN 20-DN 250)
- Branch size: DN 25, DN 40, DN 50 or DN 65
- Drill hole: Ř 19-57 mm
- Max. system pressure: 16 bar / 10 bar (pipe diameter DN 150 and larger)
- Max. temperature: +95 °C
- Min. temperature: –10 °C
- Pipe materials: All metal pipes, e.g., black, painted, galvanized, stainless, thin-walled, and copper pipes. Note! Cannot be used on annealed pipes.
- Medium: Domestic water, heating, and cooling systems (glycol- or salt-based heat transfer fluids) and compressed air.
- Connector materials: Zinc-resistant brass and stainless steel (NoTap Big available in acid-resistant version)
- Seal: EPDM (NBR available on request)
Product details
Technical specifications
Product class (ETIM)Broaching saddle (EC011014)
MaterialStainless steel
Material inlayEthylene-propylene diene monomer rubber (EPDM)
Suitable for pipe diameterOther
Mounted on pipeOther
ConnectionOther
Product codes
SAPCZQ531
HPAC0489257
PLC0489257
GTIN/EAN6415804892579
Manufacturer part number101151
Vendor material number0489257