DRAINAGE PUMP GRUNDFOS AP 12.40.08.A1 W/O SWITCH

Vertical single-stage submersible pump made of acid-resistant steel with pressure housing in vertical orientation. Designed for grey water drainage and transfer. The pump is equipped with a single-phase motor integrated into the pump. The motor is fully enclosed with insulation class F and includes thermal overload protection. The pump has an intake screen and a float switch for automatic start and stop. The impeller is of semi-open type with a free passage capacity of 12 mm for pumping surface water, groundwater, stormwater, and similar fluids. The pump features a double mechanical shaft seal with an oil chamber between them. The oil chamber is pre-filled at the factory with non-toxic special oil. The pump includes a discharge pipe and a cooling jacket for continuous cooling of the motor by the pumped fluid. Ball bearings are factory-lubricated roller bearings. The pump is ready for use and includes a carrying handle and a 10 m power cable. The cable has a plug and is sealed at the plug end with a compound to prevent moisture ingress into the stator windings. Technical specifications

• impeller type: semi-open
• maximum particle size: 12 mm
• pump housing material: stainless steel
• impeller material: stainless steel
• pump outlet connection: RP 1˝
• maximum submersion depth: 7 m
• motor type: PSC
• running capacitor: 16 µF
• input power - P1: 1.3 kW
• supply frequency: 50 Hz
• rated voltage: 1 x 230 V
• rated current: 5.9 A
• Cos phi - power factor: 0.99
• rated speed: 2780 rpm
• running capacitor size: 16 µF/400 V
• protection class (IEC 34-5): IP68
• insulation class (IEC 85): F
• cable length: 10 m
• cable connector type: SCHUKO
• net weight: 14.1 kg
• gross weight: 14.8 kg

This product description is an automated translation of the original Finnish description.