DIMMER 25-400W 2W RCLPD UR

General dimmer housing for 1-channel mounting systems S.1, B.x, Q.x, K.x and R.x with square covers. Operating voltage 230 V~ Frequency 50/60 Hz Power consumption (standby) < 0.3 W 230 V incandescent and halogen lamps 25 ... 400 W Dimmable 230 V LED lamps 5 ... 70 W Dimmable low-voltage lamps 13 ... 80 W Dimmable conventional transformers 25 ... 400 VA Electronic transformers and double-tap transformers 25 ... 400 W Number of low-voltage points unlimited Cable length, remote controls max. 50 m Load cable length max. 100 m Screw terminals (max.) 2 x 1.5/1 x 2.5 mm² Operating temperature -5 ... +45 °C Installation depth 32 mm Do not connect inductive and capacitive loads together. Comprehensive transmitting and receiving functions, together with KNX radio application modules. - Naturally low energy demand - Automatic setup for dimmable loads (Auto Detect function) - Phase-cut rising or falling edge depending on load type, self-learning - Lamp-saving soft start - Optimization of dimming function by fine-tuning load type and special setup mode - No conductive connection between mounting ring and mounting pins - Expansion unit output for button (normally closed contact), single-stage operation and motion sensor expansion unit - Short-circuit and overload protected (electronic fuse) - Markings This product description is an automated translation of the original Finnish description.