DIMMER 2X300W 2W RCLPD UR

General dimmer housing 2-channel Operating voltage 230 V~ Frequency 50/60 Hz Power consumption (standby) < 0.3 W Power consumption, standby (Channel 1/Channel 2) 0.3/0.7 W 230 V incandescent and halogen lamps per channel 35 ... 300 W Dimmable 230 V LED lamps per channel 12 ... 40 W Dimmable low-voltage lamps per channel 15 ... 54 W Dimmable conventional transformers per channel 35 ... 300 VA Electronic transformers and double-output transformers per channel 35 ... 300 W Number of load points unlimited Cable length, remote buttons max. per channel 50 m Load cable length max. 100 m Screw terminals (max.) 2 x 1.5/1 x 2.5 mm² Operating temperature -5 ... +45 °C Installation depth 32 mm Connect inductive and capacitive loads together. Comprehensive transmission and reception functions, together with the KNX radio application module. - Naturally low energy requirement - Automatic setup for dimmable loads (Auto Detect function) - Phase-cut rising or falling edge depending on load type, self-learning - Lamp-saving soft start - Optimization of dimming function by fine-tuning load type and special setup mode - No conductive connection between mounting ring and mounting pins - 2 expansion unit outputs for button (normally closed contact), separate power supply - Short-circuit and overload protected (electronic fuse) - Marked Compatible application centers: Button 2-part 8514 21 .. KNX radio button 2-part quicklink 8514 61 .. KNX radio button 4-part quicklink 8564 81 .. This product description is an automated translation of the original Finnish description.