OCCUPANCY SENSOR EER501 360D 10A IP41 FM WHITE

Motion and presence sensor for automatic on/off control of lighting in various smaller rooms, office spaces, and work areas based on lighting level and movement. Can be used in master-slave configurations to extend the detection area, with up to 10 sensors connectable as slaves. Automatic and semi-automatic operating modes can be activated using a dedicated remote control. Detection diameter is approximately 10 m for motion detection and approximately 5 m for presence detection in the central area at an installation height of 2.5 m with a 360° detection angle. The detection area can be restricted using masking stickers provided with the sensor. The lighting turn-off delay is adjustable between 5 seconds and 60 minutes. Alternatively, the sensor can be used for pulse-type control when movement is detected. Installation is into the ceiling, recessed into the ceiling surface, with a mounting hole diameter of 50-54 mm. The sensor is equipped with a 0-point relay contact with a maximum LED lamp switching capacity of 400 W (20 x 20 W). This product description is an automated translation of the original Finnish description.